Same day courier dispatch*
98.9% of orders delivered on time
Free Click and Collect Available

Meet Elements. Our New Decking Range.

elements blog image
Loading... Edited 6 November 2026
Meet Elements. Our New Decking Range.
Duncan Kingston

Written by

Duncan Kingston

Chief Operating Officer

Elements Decking, Designed to Curve | Southern Sheeting
Elements decking

Elements is an all-polymer decking board made to look like premium exotic hardwood, with none of the sanding, staining or sealing that real timber asks for. It comes in three colours and three widths and carries a 50-year fade and stain warranty. Here's everything we've learned about it so far, and how to tell whether it's right for your project.

Drag to see how a run of boards can follow a curve

Straight

Illustration only. What's achievable depends on the board width and the site, so talk to us before you design your curves.

Elements is aimed squarely at the high-end garden: the kind of project where the deck is the centrepiece rather than an afterthought, and where the finish has to hold up to close inspection.

It's also landed at a good time of year. Autumn is a sensible moment to build: landscapers have more room in the diary and the ground is still workable.

If you're in Sussex, there's one more thing worth knowing. We're an Elements Boutique Stockist, which means we're the only place in East Sussex you can buy it.

What makes Elements different

Most composite decking is a blend of wood fibre and plastic, and it does a good job. Elements takes a different route. It's a 100% synthetic capped polymer, with no wood fibres in the core or the cap, designed to replicate premium exotic hardwoods like Ipe.

That might sound like a technicality, but nearly everything good about the board traces back to it. With no wood inside, there's very little for water to soak into (it absorbs under 1.29% in testing). Because the boards aren't taking on moisture, they don't swell and shrink with the weather the way wood-filled boards can, which is why Elements can be laid without expansion gaps.

There's also nothing for mould to feed on, and nothing to splinter under bare feet. It also stays much cooler underfoot than most of the composite decking boards on the market. And to top it all off it's made in the USA from 60% recycled material, and it's 100% recyclable at the end of its life.

  • 50 yearsFade and stain warranty (residential)
  • No gapsNo expansion gaps, boards butt-join cleanly
  • Class BFire rated to EN 13501-1 (Bfl s1)
  • Cool TouchUp to 15°C cooler underfoot than typical composite in direct sun

Three colours, three widths

Elements comes in Coastline, English Walnut and Weathered Teak, each in Narrow (89mm), Standard (140mm) and Wide (184mm) boards, all 4.88m long. Mixing widths is where it really comes alive: a random pattern of narrow and wide boards gives the deck the depth you'd see in a reclaimed hardwood floor. Have a play below.

Choose your colours Pick one or more

Choose your widths Pick one or more

Standing

Colours on screen are a guide only. Before you commit, request a sample and see it in your own garden light.

Room to curve

Elements boards can also be heat-bent and shaped on site. For designers, that's a useful extra option: a deck edge that follows the line of a lawn, a curved step leading down to the garden, or a pool surround that follows the water rather than squaring it off.

The boards are heated to 115°C using specialist heating blankets, available from our supplier, then shaped to the curve. Curves take a bit of planning, so if they're part of your design, give us a call and we'll talk you through what's achievable for your board width and layout.

Where you may have seen it

Elements was used in a show garden at RHS Hampton Court Garden Festival 2025, and was featured at BBC Gardeners' World Autumn Fair. A show garden won't tell you how a deck performs after twenty British winters (that's what the warranty is for), but it does show you what designers can do with it when they're given free rein.

For the people fitting it

If you're a landscaper or installer, here's the headline: the installers who've used it describe Elements as the quickest and easiest board to install on the market. A lot of that comes down to the Cortex hidden fastening system, and to the fact that there are no expansion gaps to fuss over and no pre-drilling.

The key points, in the order you'll meet them on site:

  1. Set out the joists. Maximum 406mm centres for standard installs, tightening to 305mm for angled, diagonal or commercial decks. Leave at least 38mm clearance underneath for airflow.
  2. Lay the boards tight. No expansion gaps are needed, and boards butt-join cleanly end to end.
  3. Fix with Cortex. Screws are driven below the surface, with a minimum of two per joist and within 13mm of board ends.
  4. Plug and finish. Colour-matched plugs cap each screw, so the surface reads as clean hardwood with no visible fixings.

Cortex kits are colour-matched to each board and include 350 screws, 400 plugs and three drill bits, covering roughly 9.3m². Everything is in stock, and our free take-off service will put together an estimated take-off from your drawings or a sketch with measurements.

A warranty that works board by board

Elements carries a 50-year fade and stain limited warranty and a Lifetime Limited Warranty covering structural defects. Like any warranty, both come with terms and exclusions, and we're always happy to walk you through them.

The detail we like most is how the cover is applied. It's issued per board, not per installed deck. So if one board is compromised or fitted incorrectly, it doesn't put the cover on the rest of the deck at risk.

Low maintenance, not no maintenance

We'd rather be straight with you: no outdoor surface is truly zero effort. What Elements does is take away the heavy jobs. There's no sanding, staining or sealing, ever. What's left is a light routine:

  • Clean with soap and water or a mild household cleaner. Deal with spills within a week to stay within the stain warranty terms.
  • Don't leave rubber-backed mats or pool toys down for long periods, and keep PVC glue off the surface.
  • In winter, calcium or magnesium chloride de-icers are fine. Use a plastic shovel rather than anything with a metal edge.

That's it. Compare that with a timber deck's annual cycle and it's easy to see where the value lies over the life of the deck.

Decking calculator

Pop in the rough size of your deck for a quick guide to how many boards you'll need and roughly what they'll cost. It's a starting point, not a quote, so send us your plans for an estimated take-off when you're ready.

Board width
Show prices
Deck area20 m²
Boards (4.88m)0
Rough cost (inc VAT)£0

Board numbers allow for offcuts and cutting waste. The cost is a guide for the decking boards only, using standard prices on our website; it excludes fixings, subframe, trims and delivery, and trade or bulk prices may be lower.

The technical detail

For specifiers and the properly curious.

Sizes and prices
WidthL x W x DWeightPrice ex VAT
Narrow4880 x 89 x 25mm7.25kg£68.21
Standard4880 x 140 x 25mm11.38kg£93.70
Wide4880 x 184 x 25mm14.96kg£139.86
Cortex kitCovers approx. 9.3m²£115.96

Every width comes in all three colours, and all nine boards are in stock.

Composition and fire performance
  • 100% synthetic capped polymer, no wood fillers in the core or cap
  • 60% recycled material, 100% recyclable, made in the USA
  • Bfl s1 to EN 13501-1:2018
  • Class A flame spread (ASTM E84), no sustained combustion (ASTM D635)
  • Flash ignition 380°C, self ignition 450°C
Moisture, grip and strength
  • Water absorption under 1.29% (ASTM D1037)
  • No decay under fungus resistance testing (ASTM D1413)
  • Slip resistance 0.89 dry, 0.74 wet (ASTM F1679)
  • Stiffness (MOE) 1,079 MPa, strength (MOR) 20.3 MPa
  • Shore D hardness D85, specific gravity 0.657g/cm³
  • Thermal expansion 2.32 x 10⁻⁵ in/in/°F
Installation requirements
  • Joists at 406mm maximum centres, 305mm for angled, diagonal or commercial installs
  • Minimum 38mm clearance beneath for airflow
  • No expansion gaps and no pre-drilling
  • Cortex hidden fixings, minimum two screws per joist, within 13mm of board ends
  • Can be heat-bent on site: boards are heated to 115°C using our suppliers' heating blankets
Warranty
  • Lifetime Limited Warranty (residential) covering structural defects
  • 20-year limited warranty (commercial)
  • 50-year fade and stain limited warranty (residential only), with fade measured against a 5 Delta E (CIE) colour change threshold
  • Warranty applies per board, not per installed deck
  • Terms and exclusions apply to both warranties

Questions we're already being asked

Is Elements the same as other composite decking?

It's in the same family, but it's made differently. Many composites mix wood fibre with plastic. Elements is all polymer, with no wood in the core or the cap, which is why it resists moisture, mould and staining so well.

Does it get hot in the sun?

Any deck in full sun warms up, but Elements uses Cool Touch technology, which keeps it up to 15°C cooler underfoot than typical composite decking in direct sun. For south-facing gardens and pool surrounds, that's worth knowing.

Can I see it before I buy?

Yes, and we'd encourage it. Ask for a sample and we'll get one out to you.

Is now a good time to build a deck?

Autumn is a great time. Installers tend to have more availability than in spring, and a deck fitted now will be ready and waiting when the warm weather comes back.

Thinking about Elements for your project?

Whether it's one garden or a full order book, our knowledgeable team will help you choose boards and fixings, estimate quantities, confirm availability and arrange delivery. Give us a call on 01342 315300 or start with a sample.

Still weighing up your options? We also stock Trex, Millboard and Bison, and we're always happy to talk you through which suits your project best.

Previous article:
Next article:
Powered by Amasty Magento 2 Blog Extension