3.000m long Abutment Flashing, Goosewing Grey, 200mm x 200mm x 100°, Plastic Coated

Enter your postcode below to see the delivery methods available for this product.
Code: SF1AP200PL10A05
£39.72 Incl. VAT

12 In Stock


Code: SF1AP200PL10A05
Availability: 12 In Stock
£39.72 Incl. VAT

Please note that Southern Sheeting Supplies work on a quantity discount pricing structure. Your product cost price will reduce with the more you order.

As you add the required quantity to your cart the discounted price will be shown at the checkout screen.

The abutment flashing is to be used where a roof meets an upright wall to cover the void where the sheets meets the wall using a 22mm stitcher to fix it to the roof sheet.

This abutment is manufactured in a plastisol material with a leathergrain effect in goosewing grey (BS 10A05) and is manufactured in a 3.000m length. It is made to a 100 degree angle to suit a 10 degree roof pitch but there is some flexibility in it. This is manufactured in a 0.7mm gauge to provide strength and rigidity.

  • 3.000m Long Abutment (Internally Coloured)
  • 200mm x 200mm x 100deg.
  • No Welts
  • Also available in Juniper Green (BS 12B29)
  • Plastic Coated
  • Length - 3.000m
  • Dimensions - 200mm x 200mm
  • Angle - 100 degrees
  • Finish - Leathergrain Plastic Coating
  • Material - Galvanised Steel
  • Colour - Goosewing Grey (BS 10A05)
  • Thickness - 0.7mm
  • Weight - 6.24kg
  • Colour Side - Internal
  • Lap - 100mm Minimum
  • Edges - Un-welted

 

  • Lightweight & easy to handle
  • Easy to install
  • Colour matched to sheets
  • Plastic coated for a stronger finish 

 


  • Where do I use an abutment flashing?
  • An abutment flashing is used the bridge the void where roof sheets meet a vertical wall, to provide a weathertight seal.

  • What is the reccomended overlap of adjoining abutment flashings?
  • The minimum ovelap of adjoining abutment flashings should be 150mm.

  • How do I install an abutment flashing?
  • To install an abutment flashing, the vertical leg of the abutment flashing should sit flush with the wall to create a weathertight seal, it then needs be fixed into place using appropriate screws,  you then need to fix the lower leg of the abutment flashing to the crown of your roof sheet.

  • Can I get different sized flashings?
  • Yes, we can manufacture made to order flashings. If you want to make an enquiry, please contact our sales team

  • How do I calculate the angle I need?
  • The angle of abutment you need is calculated by adding the roof pitch degree to 90°. E.G if your roof pitch is 20°, it would be 90° + 20° = 110°

  • Is there any flexibility in the abutment flashing?
  • There is a small amount of flexibility in the ridge, so if you are using our 110° stock ridge you will be able to flex it some degrees either way.

  • Can Southern Sheeting cut flashings?
  • We are unable to cut our stock flashings, however we can provide made to order flashings to specific lengths.

  • Can I get different sized flashings?
  • Yes, we can manufacture made to order flashings. If you want to make an enquiry, please contact our sales team.