3.000m long, Ridge Cap, 1000/32B, Juniper Green, 200mm x 200mm x 120°, Polyester Coated

Enter your postcode below to see the delivery methods available for this product.
Code: SF1RD32B200PY12B29
£15.61 ex VAT

298 In Stock


Code: SF1RD32B200PY12B29
Availability: 298 In Stock
£15.61 ex VAT

Please note that Southern Sheeting Supplies work on a quantity discount pricing structure. Your product cost price will reduce with the more you order.

As you add the required quantity to your cart the discounted price will be shown at the checkout screen.
The ridge flashing is to be used on apex buildings to cover the void where the sheets meet at the ridge of the building and are fixed through the crown of a sheet using a 22mm stitcher. They are made to an 120 deg. angle to suit a roof pitch of 30 degrees, there will be some flexibility in this. These are manufactured in a polyester finish and are manufactured in a 0.5mm gauge.

  • 3.000m ridge cap in Juniper Green (BS 12B29)
  • 200mm x 200mm x 120 deg.
  • Welted
  • Polyester coated
**PLEASE NOTE - This is to suit our 1000/32B Juniper Green box profile sheets**
  • Length - 3.000m
  • Dimensions - 200mm x 200mm
  • Angle - 120deg
  • Finish - Painted Polyester Coating
  • Material - Galvanised Steel
  • Colour - Juniper Green (BS 12B29)
  • Thickness - 0.5mm
  • Weight - 5.76kg
  • Colour Side - External
  • Lap - 100mm mimimum
  • Edges - Welted

 

  • Lightweight & easy to handle
  • Easy to install
  • Colour matched to sheets
  • Welted for extra rigidity 

 

  • How much should I lap the ridges over one another?
    You should have a minimum of 150mm for lapping the ridges.

  • Do I just fix it down with the top run of main fixings?
    No, you want to use the stitchers screws to stitch the ridge to the highest point of the profile on the sheet.

  • How do I know what angle ridge cap I need?
    To work out the ridge angle, you will need to work out the angle of each slope (commonly the same each side on apex buildings). You then minus the two angles from 180° degrees to give you the angle of ridge you need. E.g. if you have an equal apex roof with 30° it would be 180° - (30° + 30°) = 120°.

  • Is there any flexibility in the ridge flashing?
    There is a small amount of flexibility in the ridge, so if you are using our 120° stock ridge you will be able to flex it some degrees either way.

  • Can I get different sized flashings?
    Yes, we can manufacture made to order flashings. If you want to make an enquiry, please contact our sales team.

  • Can Southern Sheeting cut flashings?
    Southern Sheeting will not cut stock flashings. Made to order flashings can be cut to different lengths and girths.