87mm dia, Steel Downpipe Connector - Plain Galvanised

Code: RA1CON87-GV
£4.79 ex VAT

162 In Stock


Code: RA1CON87-GV
Availability: 162 In Stock
£4.79 ex VAT

Please note that Southern Sheeting Supplies work on a quantity discount pricing structure. Your product cost price will reduce with the more you order.

As you add the required quantity to your cart the discounted price will be shown at the checkout screen.
  • 87mm Galvanised Downpipe Connector.
  • To connect two straight lengths of pipe if the male end has been cut off.
  • Female to end to sleeve over plain end of 87mm downpipe.
  • Socketed male end to fit inside plain end of pipe.
  • This item is only required when connecting two plain ends (cut ends) of pipe.  If you are using full lengths of either 1m or 3m pipe then it will have a male socketed end.
  • Overall Height - 110mm
  • Diameter at Top (female end) - 92mm
  • Diameter at Bottom (male end) - 86mm
  • Socket Length - 50mm
  • Material - Galvanised Steel
  • Material Thickness - 0.7mm
  • Manufacturer's Warranty - 5 Years

 

  • Stylish branded design
  • Connect two plain ended pipes together
  • Simple push fit design
  • 5 years manufacturer's warranty
  • Fully recyclable product

 

  • Why would I need a downpipe connector?
    If you are trying to connect two plain pieces of pipe you would need to use a downpipe connector.  We would always advise that you use full lengths of pipe incorporating the male socketed end which will give a neater finish than the downpipe connector.  Nevertheless, the connector can be a useful accessory that can save the need to buy additional length of downpipe.

  • How do you install the connector?
    The steel downpipe connector socket could not be easier to install.  Simply insert the male end into the lower pipe and feed the higher pipe into the female end.  For additional security, you could use a small screw or rivet at the join, but this is rarely needed once the downpipe holders keep the pipe locked firmly in place.