Same day courier dispatch*
Fast delivery up to 5 working days
Extensive range and stock holding

Internal Corner for Cedral Click

Item
EC1IC
As low as £28.33 £23.61
Only %1 left

Nationwide same day courier dispatch

payment-logos

Technical Specifications

  • Material - PPC Aluminium
  • Length - 3000mm
  • Dimensions - 35mm x 14mm x 14mm x 35mm
  • Thickness - 0.9mm
  • Weight - 0.6kg 

 

Internal Corner for Cedral Click
  • Internal Corner for use with Cedral Click system.  Installed vertically on 90 degree internal corners of a build where the Click planks are required either side of the corner.
  • 3000m long x 35mm x 14mm x 14mm x 35mm 
  • Please note that these trims must be installed before the boards are installed with the 35mm wings sitting behind the boards. 
  • All colour matched trims are supplied in 3m lengths and manufactured in 0.9mm thick aluminium.  Click Internal Corners are available in 10 different colours to suit all standard Click colour planks
  • Southern Sheeting stock and supply our own range of colour matched trims to suit Cedral boards.  These are manufactured from the same high quality material that Etex use, the only difference being that our trims do not include the embossed 'Cedral' logo on them.  Whilst the colour matches are good, we do not recommend using our trims butted up directly to Cedral own trims as you may see a very slight colour variance.  (You will not notice any colour variance on trims installed a few metres apart).
  • Long lasting aluminium material
  • Colour matched to suit Cedral planks
  • Light weight and easy to handle

How do you install a Click Internal Corner?
Click Internal corners can be screwed or nailed vertically to the timber battens at 90degree internal corners of the building.  Importantly the corner profiles need to be installed prior to installing the boards. For full details on how to fit the boards please visit the installation tab to the left of this one.  From there you can download fixing guides or watch instructional video's which will explain the whole process.  External corners are also used vertically at the window reveals on the Click System.

Can I use a Click Internal Corner when installing Lapped board?
No, You will not be able to use the Cedral Click corner with the lapped system as the recessed legs on the corner are not deep enough to allow for two lapped boards.  The board will sit proud of the trim and end exposed.

Do you supply corner trims to match the colour of the cladding?
Yes, we stock colour matched trims in all 10 available UK Cedral Click plank colours.

Do you supply Etex manufactured Cedral trims?
Southern Sheeting stock trims are manufactured by our sister company which ensures consistency in our stock availability.  We do not stock Cedral trims but can source them on request. Please note that Cedral trims will be subject to longer lead times and higher prices than our own trims.

What is the difference between Southern Sheeting Trims and Cedral own trims?
There is very little difference between the trims that we produce and the trims a that Etex produce.  Both trims are manufactured in the same high quality 0.9mm thick aluminium in the same finish.  Once installed you will not know the difference but before installation you can tell the difference by the Etex trims having an embossed 'Cedral' stamp on it.  Southern Sheeting trims will have no stamp but will have a product label on the inside.

Can I use Cedral own trims and Southern Sheeting trims on the same project?
Yes, you can use Cedral own trims and our trims on the same project, but due to colour batches we suggest that you do not use them right next to each other as you may see a slight shade variance when comparing them back-to-back.

What if the trims are not a good match to the boards?
It is very rare that you will be supplied trims that are not a good match to the boards.  It is however important to note that Southern Sheeting colour match their trims to Cedral trims to remain consistent with trims, we do not match our trims to the boards.  The most commented on colour variance is C05 Grey where the trims do come up a lighter grey than the boards - this is the same for both Cedral trims and Southern sheeting trims.

What if all my trims look white when delivered?
Most of our trims will have a white protective film on them to protect them before installation.  Have you removed the film?  Please ensure you remove this prior to installation as it is very hard remove afterwards.

Do you supply colour matched trims in a fibre cement type product?
No, Etex used to manufacture 'Eterspan' which was a thick fibre cement corner trim.  There was a few quality issues with these and they were discontinued around 2011.  Nowadays we would only recommend aluminium trims for use with Cedral.

Can you manufacture trims in others shapes and sizes?
Yes, our sister company is a manufacture of these trims and so can make bespoke trims suitable for drip flashings, window cills and different corners.  There are some restrictions on angles and return legs due to tooling but if you are able to send through a sketched cross sectional drawing with measurements of what you need we will happily look into this for you.
 

Customer Questions
No Customer Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Internal Corner for Cedral Click
Your Rating

Find the right materials and support for your project

We can help! View our supportive help guides and videos.

Our supportive guides and help videos will help you achieve the best results. Our knowledgeable team can also offer helpful tips, and support to help you plan and purchase what you need!