3.000m long, Abutment Flashing 1000/32B Juniper Green, 200mm x 200mm x 100°, Polyester Coated

Enter your postcode below to see the delivery methods available for this product.
Code: SF1AP32B200PY12B29
£26.87 Incl. VAT

24 In Stock

Code: SF1AP32B200PY12B29
Availability: 24 In Stock
£26.87 Incl. VAT

Please note that Southern Sheeting Supplies work on a quantity discount pricing structure. Your product cost price will reduce with the more you order.

As you add the required quantity to your cart the discounted price will be shown at the checkout screen.

The abutment flashing is to be used where a roof meets an upright wall to cover the void where the sheets meets the wall using a 22mm stitcher to fix it to the roof sheet.

This abutment is manufactured in a polyester finish in juniper green (BS 12B29) and is manufactured in a 3.000m length. It is made to a 100 degree angle to suit a 10 degree roof pitch but there is some flexibility in it. This is manufactured in a 0.5mm gauge.

  • 3.000m Long Abutment (Internally Coloured)
  • 200mm x 200mm x 100deg.
  • No Welts
  • Polyester Coated
**PLEASE NOTE - This is to match our 1000/32B Juniper Green polyester box profile sheets**
  • Length - 3.000m
  • Dimensions - 200mm x 200mm
  • Angle - 100deg
  • Finish - Painted Polyester Coating
  • Material - Galvanised Steel
  • Colour - Juniper Green (BS 12B29)
  • Thickness - 0.5mm
  • Weight - 5.76kg
  • Colour Side - Internal
  • Lap - 100mm mimimum
  • Edges - Un Welted


  • Lightweight & easy to handle
  • Easy to install
  • Colour matched to sheets


  • Where do I use an abutment flashing?
    An abutment flashing is used the cap the void where the roof sheets meet a wall at the top of the run.

  • How much should I lap the abutments over one another?
    You should have a minimum of 150mm for lapping the ridges.

  • How do I fix the abutment flashing?
    You want to use the stitchers screws to stitch the abutment to the highest point of the profile on the sheet, and a suitable fixing for the wall you are putting the abutment up .

  • Can I get different sized flashings?
    Yes, we can manufacture made to order flashings. If you want to make an enquiry, please contact our sales team.

  • How do I know what abutment I need?
    The angle of abutment you need is calculated by adding the roof pitch degree to 90°. E.G if your roof pitch is 20°, it would be 90° + 20° = 110°.

  • Is there any flexibility in the abutment flashing?
    There is a small amount of flexibility in the ridge, so if you are using our 110° stock ridge you will be able to flex it some degrees either way.

  • Can Southern Sheeting cut flashings?
    Southern Sheeting will not cut stock flashings. Made to order flashings can be cut to different lengths and girths.