87mm dia, Steel Downpipe Branch - Plain Galvanised

Code: RA1BRAN87-GV
£17.82 ex VAT

38 In Stock


Code: RA1BRAN87-GV
Availability: 38 In Stock
£17.82 ex VAT

Please note that Southern Sheeting Supplies work on a quantity discount pricing structure. Your product cost price will reduce with the more you order.

As you add the required quantity to your cart the discounted price will be shown at the checkout screen.
  • 87mm Galvanised Downpipe Branch.

  • Joins two water drainage columns to one pipe and one drain / gully  
  • Helps to reduce costs by eliminating the need for extra drainage
  • Branch angle at 60° for incoming downpipe

 
Dimensions (see drawing): Dim A - 89mm
  • Dim B - 86mm
  • Dim C - 290mm
  • Dim D - 180mm
  • Dim E - 40mm
  • Dim F - 60° angle
  • Overall Height - 290mm
  • Length of Socket (male end) - 40mm
  • Effective Height - 250mm
  • Diameter of Top (female end) - 89mm
  • Diameter of Bottom (male end) - 86mm
  • Degree of Branch (from vertical) - 60deg
  • Degree of Branch (from horizontal) - 30deg
  • Material - Galvanised Steel
  • Material Thickness - 0.7mm
  • Manufacturer's Warranty - 5 Years

 

  • Stylish branded design
  • Easy push fit connection
  • 5 year manufacturer's warranty
  • Fully recyclable product 

 

  • How do you install a RoofArt steel downpipe branch?
    The RoofArt Branch can be easily push fit attached to a downpipe that has been cut to the desired height.  Note that the top end of the branch has a female end and can accommodate a plain cut end of downpipe – it does not need a male socketed end.


    What angle can the diagonal pipe be inserted into the steel Y branch inlet?
    The centre of the inlet is set to take a pipe coming in at a 30° angle but the hole is elongated which allows for branched pipe to come in at between 25° to 35° if needed.


    Do I need a pipe connector to join the branch to the lower pipe?
    No, the bottom of the downpipe branch has a male socketed end which is designed to slide directly into a cut plain end of downpipe.


    Can I get a double branch to allow two pipes to run into the same pipe from either side?
    No, RoofArt does not offer a double branch, but you can use two standard branches connected to allow for additional pipes to feed the same downpipe at different heights.