Same day courier dispatch*
Fast delivery up to 5 working days
Extensive range and stock holding

87mm dia, Steel Downpipe Branch - Plain Galvanised

£23.12 £19.27
38 In Stock

  • Buy 2 for £21.97 £18.31 each and save 5%
  • Buy 6 for £20.80 £17.33 each and save 10%
  • Buy 8 for £18.50 £15.42 each and save 20%
  • Buy 12 for £16.18 £13.48 each and save 30%
  • Buy 19 for £13.87 £11.56 each and save 40%
  • Buy 24 for £12.73 £10.61 each and save 45%
  • Buy 29 for £11.57 £9.64 each and save 50%
  • Buy 39 for £10.40 £8.67 each and save 55%

Technical Specifications

  • Overall Height - 290mm
  • Length of Socket (male end) - 40mm
  • Effective Height - 250mm
  • Diameter of Top (female end) - 89mm
  • Diameter of Bottom (male end) - 86mm
  • Degree of Branch (from vertical) - 60deg
  • Degree of Branch (from horizontal) - 30deg
  • Material - Galvanised Steel
  • Material Thickness - 0.7mm
  • Manufacturer's Warranty - 5 Years
  • 87mm Galvanised Downpipe Branch.

  • Joins two water drainage columns to one pipe and one drain / gully  
  • Helps to reduce costs by eliminating the need for extra drainage
  • Branch angle at 60° for incoming downpipe

Dimensions (see drawing): Dim A - 89mm
  • Dim B - 86mm
  • Dim C - 290mm
  • Dim D - 180mm
  • Dim E - 40mm
  • Dim F - 60° angle
  • Stylish branded design
  • Easy push fit connection
  • 5 year manufacturer's warranty
  • Fully recyclable product 

How do you install a RoofArt steel downpipe branch?
The RoofArt Branch can be easily push fit attached to a downpipe that has been cut to the desired height.  Note that the top end of the branch has a female end and can accommodate a plain cut end of downpipe – it does not need a male socketed end.

What angle can the diagonal pipe be inserted into the steel Y branch inlet?
The centre of the inlet is set to take a pipe coming in at a 30° angle but the hole is elongated which allows for branched pipe to come in at between 25° to 35° if needed.

Do I need a pipe connector to join the branch to the lower pipe?
No, the bottom of the downpipe branch has a male socketed end which is designed to slide directly into a cut plain end of downpipe.

Can I get a double branch to allow two pipes to run into the same pipe from either side?
No, RoofArt does not offer a double branch, but you can use two standard branches connected to allow for additional pipes to feed the same downpipe at different heights.

Customer Questions
No Customer Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:87mm dia, Steel Downpipe Branch - Plain Galvanised
Your Rating
Frequently Bought Together

Find the right materials and support for your project

We can help! View our supportive help guides and videos.

Our supportive guides and help videos will help you achieve the best results. Our knowledgeable team can also offer helpful tips, and support to help you plan and purchase what you need!