Same day courier dispatch*
Fast delivery up to 5 working days
Extensive range and stock holding

3.000m long, Ridge Cap, Galvanised, 200mm x 200mm x 120°

Item
SF1RD200GV
£31.99 £26.66
77 In Stock
payment-logos
  • Buy 9.99 for £28.79 £23.99 each and save 10%
  • Buy 19.99 for £28.00 £23.33 each and save 12%
  • Buy 29.99 for £27.19 £22.66 each and save 15%

Technical Specifications

  • Length - 3.000m
  • Dimensions - 200mm x 200mm
  • Angle - 120deg
  • Finish - Plain Galvanised
  • Material - Galvanised Steel
  • Thickness - 0.7mm
  • Weight - 6.24kg
  • Lap - 100mm mimimum
  • Edges - Welted

 3.000m long, Ridge Cap, Galvanised


  • To run along ridge line of roof.  Allow minimum of 100mm when overlapping
  • Plain Galvanised
  • 200mm x 200mm x 120 deg.
  • Should be fastened to the crown of sheeting using a 22mm stitcher screw
  • 3.000m long
  • 120 degree bend ideal for 30 degree pitch but can adjust to meet similar pitches
  • Welted edges


  • Lightweight & easy to handle
  • Easy to install
  • Suit our galvanised steel sheets
  • Welted for extra rigidity 

How much should I lap the ridges over one another?
You should have a minimum of 150mm for lapping the ridges.

Do I just fix it down with the top run of main fixings?
No, you want to use the stitchers screws to stitch the ridge to the highest point of the profile on the sheet.

How do I know what angle ridge cap I need?
To work out the ridge angle, you will need to work out the angle of each slope (commonly the same each side on apex buildings). You then minus the two angles from 180° degrees to give you the angle of ridge you need. E.g. if you have an equal apex roof with 30° it would be 180° - (30° + 30°) = 120°.

Is there any flexibility in the ridge flashing?
There is a small amount of flexibility in the ridge, so if you are using our 120° stock ridge you will be able to flex it some degrees either way.

Can I get different sized flashings?
Yes, we can manufacture made to order flashings. If you want to make an enquiry, please contact our sales team.Can Southern Sheeting cut flashings?
Southern Sheeting will not cut stock flashings. Made to order flashings can be cut to different lengths and girths.

Customer Questions
No Customer Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:3.000m long, Ridge Cap, Galvanised, 200mm x 200mm x 120°
Your Rating

Find the right materials and support for your project

We can help! View our supportive help guides and videos.

Our supportive guides and help videos will help you achieve the best results. Our knowledgeable team can also offer helpful tips, and support to help you plan and purchase what you need!