Start Profile for Cedral Lap - C06 Grey Green

 Start Profile for Cedral Lap - C06 Grey Green

• Start Profile for use with Cedral weatherboard lap system.  Used to create a 'kick-out' along the first bottom run of cladding as well as above windows and doors. 
• 3000m long x 30mm x 10mm x 30mm x 9mm. 
• Please note that these trims must be installed before the boards are installed, the Cedral weatherboard plank sits on the 9mm leg creating a 21mm kick out at the bottom of the board and ensuring the bottom run boards sit at the same angle as any lapped boards above it. 
• All colour matched trims are supplied in 3m lengths and manufactured in 0.9mm thick aluminium.  End Profile 45s are available in 23 different colours to suit all Cedral planks 
• Southern Sheeting stock and supply our own range of colour matched trims to suit Cedral boards.  These are manufactured from the same high quality material that Etex use, the only difference being that our trims do not include the embossed 'Cedral' logo on them.  Whilst the colour matches are good, we do not recommend using our trims butted up directly to Cedral own trims as you may see a very slight colour variance.  (You will not notice any colour variance on trims installed a few metres apart).